NBK – Couplings for Vacuum Variable Capacitor MSXP-C-W-SP
- Sản Phẩm
NBK – Couplings for Vacuum Variable Capacitor MSXP-C-W-SP
-
Liên hệ
Couplings for Vacuum Variable Capacitor – Slit-type (PEEK) – Clamping Type
Dimension Drawing
Specs/CAD
Unit : mm
| Part Number | A | L | W | F | G | M | D1 | D2 | Screw Tightening Torque(N・m) |
CAD | RFQ |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MSXP-25C-W40-5-6.35-SP3 | 25 | 11.4 | 40 | 4.5 | 9 | M3 | 5 | 6.35 | 0.6 | CAD | RFQ |
●All products are provided with hex socket head cap screw.
Material/Finish
| MSXP-C-W-SP | |
|---|---|
| Main unit | PEEK (Polyether ether ketone) |
| Hex Socket Head Cap Screw | SUSXM7 |
Structure
Characteristics
- This is a resin spring coupling with single-piece construction. A slit is inserted into a cylindrical material.
- PEEK superior in physical properties and electrical insulation is adopted.
- A plate spring formed by a slit allows eccentricity, argument, and end-play to be accepted.
Property
| MSXP-C-W-SP | |
|---|---|
| Zero Backlash | ◎ |
| Allowable Misalignment | ○ |
| Electrical Insulation | ◎ |
| Allowable Operating Temperature | -20°C to 120°C |
Application
High frequency power / Matching box
Precautions for Use
Mounting on D-cut shaft
In principle, use a round shaft.
If a D-cut shaft is used, an excessive load due to tightening by the hex socket head cap screw may damage the coupling, depending on the mounting position of the D-cut surface of the shaft.
When using a D-cut shaft, mount so that the D-cut surface of the shaft avoids contact with the coupling slit as much as possible.
Sản phẩm cùng loại
