OMRON E3T-ST11 2M
- Sản Phẩm
OMRON E3T-ST11 2M
-
Liên hệ
| Shape | Rectangular type (Side-view) |
|---|---|
| Sensing method | Through-beam |
| Sensing distance | 1 m |
| Standard sensing object | Opaque 2 mm dia. min. |
| Minimum sensing object | 2 mm dia. (Opaque) |
| Directional angle | Emitter: 2 to 20 DEG Receiver: 2 to 70 DEG |
| Light source | Red LED (Emission wave length: 650 nm) |
| Power supply voltage | 12 to 24 VDC ±10% (ripple (p-p) 10% max.) |
| Current consumption | Emitter: 10 mA max. Receiver: 20 mA max. |
| Control output | NPN open collector output 26.4 VDC max. Load current: 50 mA max. Residual voltage: 1 V max. (Load current Less than 10mA)/Residual voltage: 2 V max. (Load current 10 to 50 mA) |
| Operation mode | Light-ON |
| Protective circuit | Output short-cut protection Output reverse polarity protection Power supply reverse polarity protection |
| Response time | 1 ms max. (Operate or reset) |
| Ambient illuminance | Incandescent lamp: 5000 lux max., Sunlight: 10000 lux max. |
| Ambient temperature (Operating) | -25 to 55 ℃ (with no icing or condensation) |
| Ambient temperature (Storage) | -40 to 70 ℃ (with no icing or condensation) |
| Ambient humidity | Operating: 35 to 85% Storage: 35 to 95% (with no icing or condensation) |
| Insulation resistance | 20 MΩ min. at 500 VDC |
| Dielectric strength | 1000 VAC at 50/60 Hz for 1 min |
| Vibration resistance | 10 to 2000 Hz, 1.5-mm or 300 m/s**2 double amplitude for 0.5 hours each in X, Y, and Z directions |
| Shock resistance | 1000 m/s**2 for 3 times each in X, Y, and Z directions |
| Degree of protection | IEC: IP67 |
| Connection method | Pre-wired models (Cable length: 2 m) |
| Indicator | Operation indicator (orange), Stability indicator (green) |
| Weight (packed state) | Approx. 40 g |
| Material | Case: PBT Lens: Denatured Polyarylate Display: Denatured Polyarylate |
| Accessories | Instruction manual, Set screws for mounting (M2*14), Nuts |
XEM CATALOG SẢN PHẨM TẠI ĐÂY
Sản phẩm cùng loại
